KTM 500 EXC-F – plenty of power, best for off-road and experienced riders ; Honda XR650L – simple, reliable, stable/heavier, and good all-around; KTM 690 Enduro R – Great engine, a little heavier and more stable than the 650 dual-sport bikes; Husqvarna 701 Enduro – Same as KTM 690 but “white” The brand’s newest dual sport, the ES 700, makes its way to the US for 2023. GasGas. Jumping right into the thick of it, the ES 700 is powered by a liquid-cooled big-bore 693cc four-stroke Husqvarna TR650 Terra vs. Kawasaki KLR650 vs. KTM 690 Enduro R | Singles Club. One Bike, Any Road 2023 Yamaha MT-10 for Track Riders. Latest. News. BMW R 1300 GS - Motorcycle of the Year For dirt bikes, this measurement should be 30% to 33% of the total travel. Example: 12″ travel x .33%=4″ sag. Linkless KTM models have 13.2″ of travel and the sag should be 105-110mm. Measuring Free Sag Using the same measurement points as used for the rider sag, measure the rear suspension sag with no rider aboard. Still, if you are a full-time street rider, the supermoto-inspired KTM 690 SMC R is a fraternal twin with 17-inch street tires and a much better choice for exclusively on-road riders. 8. The first of the two KTM bikes on this list is the 690 Enduro R, often hailed as an off-road scalpel. It is a lightweight and nimble bike designed to conquer technical terrain with precision. 2022 KTM 250/450 SX-F. Notes: The stock bar bend dimensions on the orange brigade is also decent, but it’s too stiff and long (insert your own joke here). If you don’t think it’s too stiff, you can simply cut the bar to 805mm and run it! Preferred: Pro Taper EVO Race Team cut to 805mm (W)810 (H)91 (R)49 (S)52. 14 hours ago · Here are some shots by @The Cone of Silence, who was on a Christmas trip of 4000 km to South Australia, the Great Ocean Road, and Victorian High Country a few weeks ago with his 2021 KTM 690 Enduro R. “Day one: camping on the Murray River.” “Day two: took Bambi onto the beach. Ground one end of the tube off at about a 45° angle and asked a local welding shop to weld the washer onto it. Removed the kickstand and cut off its foot a little more than an inch. Slid the new foot into the kickstand, and drilled two sets of corresponding holes into the new foot. Painted the pieces: 1.75 m. Never had any problems, neither with the Motard kit nor enduro kit. IMO it's just a matter of habit. Of course, in enduro the height helps you to manage the bike better, but even if you are short you can still carry it. It is a little more difficult but not impossible. lNGeE8.