Step 1 Connect Cronus Zen to the PlayStation 4. Before you begin, make sure you are updated to the latest versions of Cronus Zen firmware and Zen Studio software. Turn on the PlayStation 4 with the consoles power button. Connect the short (12″) micro-USB cable to the back of the Zen. Connect the other end of the USB cable to the PS4. Double-check the controller is actually charged. That's the first port of call here. After that, and if it doesn't work, you can try repairing your controller. Just go to Settings, Devices, Bluetooth Devices, and then select the controller, and choose Forget Device. You can then reconnect it via the USB cable and it will hopefully work. When using your controller on a device for the first time, you must pair it. Press and hold the PS button until the light bar turns off. Your controller charges via a standard USB Micro-B input cable. It requires a USB Battery Charging 1.2-compatible wall charger to charge, or a standard USB 2.0 or 3.0 compatible port found on a PS4 console 1. Firstly, you need to ensure that the controller is turned off. 2. After that, on your controller, click and hold the “Share” + “PS” buttons until the LED player status determinative begins to flash. 3. Lastly, on the USB Bluetooth receiver, click the SYNC button (the sync LED will flash). In a simple way. Remove the back piece of the controller. Pull the controller apart from the indent on the bottom between the analog sticks. Gently remove the back of the controller by jiggling it up and forward. Take care not to pop the buttons off. [12] Spray the back piece with a surface cleaner and dry cloth if it's dirty. 4. 2. When the welcome window appears, click Next. 3. Confirm that you agree with the terms of the License Agreement and click Next. 2.7M views 4 years ago. 0:00 Intro0:15 Using the basic connection 0:46 Charging via USB1:10 Resetting the controllerIn this guide, we will go over how to connect your PS4 controller Open the VDX via Steam, it will recognize it as an Xbox controller so select DualShock 4 and click conect, after that open the PS4 Remote Play via Steam and it will work normally, unfortunately that way Rumble and Motion Controls don't work either. Unfortunately all modes require a PC with the PS4 Remote Play open, but it is a good alternative Players will have a fantastic opportunity if they can use the PS4 controller to play on the PC. The players may benefit from having a fresh and different experience. GTA 5 can be played on a PC with a PS4 controller without any difficulty or the need to download any additional software. There is a way to ensure you get the GTA experience you want. Tap on the Controller tab. This is the seventh tab on top of the screen. Tap on Settings. This is the second tab on top of the screen. Turn on Enable controller support feature. You can do this by uw3Fv.